Tyre Shaping and Curing Press- 55" Mechanical type

1.For PCR,LTR tire 15"-20" 2.Platen type, one mold 3.High-precision machining 4.PLC and touch screen control

This Curing Press is appliable for curing PCR & LTR tyres with Nitrogen or steam as curing medium.This Curing Press is a Mechanical type, the beam moves vertically and horizontally for tyre loading and unloading. The center mechanism is BOM type and the curing mould is heated by PLATEN. Other features: Dual-Column Vertical Chuck Loader, Dual-Cylinder Unloading Device, Pro-Bar Style Mould Stripping Unit. As per customer's request, Auto-Adjusting Device, SMO Drive Device, PCI and Singel-, Double- or Triple-position Green Tyre Holder are available. Curing Piple can also be made into order. This Curing Press uses PLC for real-time control, and industrial PC for Human-Machine Operation Interface.All parameters can be re-set during Curing Cycle, and real-time data collection/preservation,alarming,as well as data back dating can also be realized through this system. With ethernet interface,Curing Press group-management is available.

Brief Technical Parameters:

1	Type of Cured Tire		PCR & LTR Tire
2	Heating Type		Platen
3	Number of Mould		1
4	Type of Center Mechanism		BOM
5	I.D. of Mould Shield		1350mm
6	Max. Mould closing force		1380kN
7	Height of Mould		420-480mm
8	Max Mould Weight		3000kgs
9	Diameter of Bead		15-20
10	Max. Height of Green Tire		450mm
11	Max. OD of Cured Tire	Two-piece Mold	950mm
		Segmental Mold	900mm
12	Max.Section Width of Cured Tire		350mm
13	Designed Mould Open/Close time		18s
14	Max Load of VCL		60kgs
15	Max External Pressure		1.4Mpa
16	Max.Internal Pressure		2.8Mpa
17	Hydraulic Water Pressure		1.8-2.1Mpa
18	Compressed Air Pressure		0.7Mpa
19	Control Air Pressure		0.25-0.35Mpa

* Our Curing Press range is from 42" to 105".

Tyre Shaping and Curing Press- 55" Mechanical type